• News & Events
  • CNC News
  • Metal Laser Cutter Maintenance and Customization Available
  • Metal Laser Cutter Maintenance and Customization Available

    2022-10-09 Views: 0 Views

    Metal Laser Cutter Maintenance:

    1.Replacement of circulating water and cleaning of the water tank: Make sure that the laser tube is filled with circulating water before the metal laser cutter works. The quality and temperature of the circulating water directly affect the service life of the laser tube. Therefore, it is necessary to regularly replace the circulating water and clean the water tank. This is recommended once a week.

    2.Fan cleaning: The long-term use of the fan in the metal laser cutterwill cause a lot of solid dust to accumulate in the fan, making the fan generate a lot of noise, and is not conducive to exhaust and odor removal. When the suction of the fan is insufficient and the smoke exhaust is not smooth, it is necessary to clean the fan.

    3.Cleaning of the lens: There will be some mirrors and focusing mirrors on the metal laser cutter. The laser is reflected and focused by these mirrors and emitted from the laser head. The lens is easily stained with dust or other contaminants, resulting in loss of laser light or damage to the lens. So clean the lenses every day. When cleaning, pay attention to: 1). The lens should be wiped gently to avoid damaging the surface coating; 2) The wiping process should be handled with care to prevent it from falling; 3) Please keep the concave side down when installing the focusing lens.

    4.Guide rail cleaning: guide rail and linear shaft are one of the core components of the equipment, and their function is to guide and support. In order to ensure the high processing accuracy of the metal laser cutter, its guide rails and straight lines are required to have high guiding accuracy and good motion stability. During the operation of the equipment, a large amount of corrosive dust and smoke will be generated during the processing of the workpiece, and these smoke and dust will be deposited on the surface of the guide rail and the linear axis for a long time, which has a great impact on the processing accuracy of the equipment, and will Corrosion spots are formed on the surface of the linear shaft of the guide rail, which shortens the service life of the equipment. Therefore, clean the machine guide rails every two weeks. Turn off the machine before cleaning.

    5.Tightening of screws and couplings: After the motion system works for a period of time, the screws and couplings at the motion joints will become loose, which will affect the stability of the mechanical movement. Therefore, the transmission should be observed during the operation of the metal laser cutter. If there is any abnormal noise or abnormal phenomenon in the parts, if any problem is found, it should be strengthened and maintained in time. At the same time, the metal laser cuttershould use tools to tighten the screws one by one over a period of time. The first firming should be about a month after the device is used.

    6.Inspection of the optical path: The optical path system of the metal laser cutteris completed by the reflection of the mirror and the focusing of the focusing mirror. There is no offset problem of the focusing mirror in the optical path, but the three mirrors are fixed by the mechanical part. There is a high possibility of offset. Although the offset usually does not occur, it is recommended that the user must check whether the optical path is normal before each work.


    Metal Laser Cutter Can be Customized

    Generally speaking, it is recommended to use a metal laser cutter to cut metal materials such as carbon steel plates within 12mm and stainless steel plates within 10mm. metal laser cutter has no cutting force, no deformation during processing: no tool wear, good material adaptability: no matter it is simple or complex parts, it can be cut with laser precision and rapid prototyping at one time: the slit is narrow, the cutting quality is good, and the degree of automation is high. Easy to operate, low labor intensity, no pollution: automatic cutting and nesting, improved material utilization, low production cost and good economic benefits.

    WhatsApp Chat Online E-mail